|
|
Post by ira on Feb 5, 2013 11:07:26 GMT -5
[glow=red,2,300]PEGASUS GETS IT'S WINGS!!![/glow] Well maybe not Wings...More like Four New Fins!  I cut these from sheet plastic and glued them in place with Zap-A-Gap/Green Label...  More Coming...  |
|
|
|
Post by ira on Feb 7, 2013 18:13:47 GMT -5
[glow=red,2,300]SPOILERS!!![/glow] I cut 2 lengths of 5/16th inch wide Plastic Strip and glued them in place to extend the Spoilers...  I made 2 Jet Engine Mounts from Sheet Plastic and attached them as shown.  This View shows the Engine Mounts and all 6 of the Pegasus Fins!  Side View!  Hope you like it so far... |
|
|
|
Post by modelcarfan on Feb 7, 2013 23:19:32 GMT -5
Mr Jestons is gonna buy this car  b |
|
|
|
Post by ira on Feb 8, 2013 10:32:34 GMT -5
Mr Jestons is gonna buy this car b [glow=red,2,300]I think so!!![/glow] |
|
|
|
Post by Starryeyes on Feb 10, 2013 14:13:08 GMT -5
This baby is going to need all the stabilazation she can get !! .. This looks more like an excutive car for Spacely Sprockets ! .. I love it !
|
|
|
|
Post by ira on Feb 11, 2013 10:16:20 GMT -5
This baby is going to need all the stabilazation she can get !! .. This looks more like an excutive car for Spacely Sprockets ! .. I love it ! [glow=red,2,300]THANKS CHUCK!!![/glow] |
|
|
|
Post by ira on Feb 13, 2013 12:06:56 GMT -5
[glow=red,2,300]ROUNDING THE INTAKES!!![/glow] I rounded out the inside of the Intakes with "Half-Round" Plastic Strip and Putty...  Got the Fins and Spoilers molded in, nice & smooth. Most of the Body & Underbody work is done now, so I applied some more primer.  |
|
|
|
Post by ira on Feb 25, 2013 3:57:16 GMT -5
[glow=red,2,300]INTERIOR STRIPS!!![/glow] First I made the rear of the Interior with two 5/16" Plastic Strips on each side. This was easier than trying to cut a template add fit one piece of plastic on each side.  Then I glued a 5/16" Strip on each side of the Cockpit...  The strips were positioned to add a little more room for the Engines!  More Coming... |
|
|
|
Post by ira on Feb 25, 2013 10:49:27 GMT -5
[glow=red,2,300]INTERIOR SIDES...[/glow] I cut 2 side walls from sheet plastic and glued them in place. This will leave just enough room for the BiG Engines!  The fronts of the Interior Sides were attached to the Intake Shafts to complete them.  The Sides were cut so that they fit up against the Underbody tightly.  More Coming... |
|
|
|
Post by ira on Feb 27, 2013 15:06:41 GMT -5
[glow=red,2,300]SIDEWINDER DASH!!![/glow] The dashboard from Revells Dodge Sidewinder will be perfect for Pegasus! Just have to cut a little here...  Then I turned it up side down and carved away a little more, to add some legroom...  Here it is up-side down and carved to fit, perfect for Pegasus!  More Coming... |
|
|
|
Post by ira on Mar 1, 2013 3:53:36 GMT -5
[glow=red,2,300]MOUNTING THE DASH...[/glow] I traced the edge of the dashboard on to the body. By cutting this area out, I will be able to mount the dash about 1/4" forward.  Here it is in place!  |
|
|
|
Post by ira on Mar 3, 2013 16:11:42 GMT -5
[glow=red,2,300]AERO SEAT!!![/glow] The seat is from the Monogram Aerotech kit. I used several strips of plastic to add arms, front, bottom, rear and sides...  Here is the dash after a little sanding and filing.  |
|
|
|
Post by ira on Mar 6, 2013 11:01:42 GMT -5
[glow=red,2,300]NO WHEELS!!![/glow] The Landing Gear is from an AMT Star Wars X-Wing Fighter. I had to shorten the Rear Gear to get the right height...  Here they are in place.  All of the Body Work is Finished! Ready for some Paint!  |
|
|
|
Post by ira on Mar 8, 2013 10:10:56 GMT -5
[glow=red,2,300]PAINTED!!![/glow] I painted the Pegasus with an undercoat of Testors Diamond Dust then a few coats of Tamiya Camel Yellow. Black will be the secondary color. The decals will be Mac Tools Great Red & Black NASCAR Decals!  |
|
|
|
Post by Starryeyes on Mar 10, 2013 18:18:32 GMT -5
[glow=red,2,300]PAINTED!!![/glow] I painted the Pegasus with an undercoat of Testors Diamond Dust then a few coats of Tamiya Camel Yellow. Black will be the secondary color. The decals will be Mac Tools Great Red & Black NASCAR Decals! this looks fantastic Ira.. Really !! .. always love your execution .. and the "play by play" makes it even more interesting ! ! |
|
