|
|
Post by ratroddah on Jun 27, 2021 11:42:41 GMT -5
Started this build with the back half from spare parts of the original kit. Other spare parts are the chassis and radiator. That's the plan anyway. Thanks for the spares Starryeyes! I can't seem to be able to rotate the pics on my phone. Uh oh.   |
|
|
|
Post by Starryeyes on Jun 27, 2021 21:03:22 GMT -5
Started this build with the back half from spare parts of the original kit. Other spare parts are the chassis and radiator. That's the plan anyway. Thanks for the spares Starryeyes! I can't seem to be able to rotate the pics on my phone. Uh oh. View AttachmentView AttachmentHave fun with man ! That’s all that matters !! |
|
|
|
Post by Fletch on Jun 28, 2021 12:34:23 GMT -5
Looking forward to how this will turn out!
|
|
|
|
Post by ratroddah on Jul 13, 2021 14:53:45 GMT -5
Did some "bending" on the chassis. The nailhead came from the 22 jr kit and will be tooned up a bit.  |
|
|
|
Post by Starryeyes on Jul 13, 2021 20:30:09 GMT -5
Did some "bending" on the chassis. The nailhead came from the 22 jr kit and will be tooned up a bit. View AttachmentLooks great buddy .. I like where this is going 🤘🏼🙌🏼 |
|
|
|
Post by sharp on Jul 18, 2021 10:17:19 GMT -5
Cool idea!!!!
|
|
|
|
Post by ratroddah on Jul 27, 2021 8:13:33 GMT -5
Side panels and thin strips were from plastic sheet. Cowl is from a '29 Ford pickup. Axle came from the Ohio George toon kit. I had to elongate it to fit the body. Lots of parts from the stash. Wicked Red paint.  |
|
|
|
Post by plastimatic on Aug 3, 2021 21:18:34 GMT -5
This is gonna be a beauty!
Amazing that it started with just a few original pieces.
|
|
|
|
Post by ratroddah on Aug 4, 2021 7:44:06 GMT -5
Rear tires from the Ohio George kit, fronts courtesy of Davey. Fink was 3-d printed from a STEM instructor from work. Not hi-res tho. I made the legs, injectors tubes, and tail. Arms from the Der Beetle Bus. Top is sheet aluminum. It's done.  |
|
|
|
Post by Starryeyes on Aug 17, 2021 12:51:02 GMT -5
Rear tires from the Ohio George kit, fronts courtesy of Davey. Fink was 3-d printed from a STEM instructor from work. Not hi-res tho. I made the legs, injectors tubes, and tail. Arms from the Der Beetle Bus. Top is sheet aluminum. It's done. View AttachmentI like it ! Great collaboration of parts and bashing .. nicely done my friend 👍🏼 ! |
|
|
|
Post by sharp on Aug 24, 2021 10:42:39 GMT -5
I love it man!!! Very cool!!!
|
|
|
|
Post by mod3llover on Nov 26, 2021 21:10:59 GMT -5
That is so kool!!!
|
|
